Oki C 9400 - Manual (Page 126)

ETHERTALK ENABLE , DISABLE
NETBEUI ENABLE , DISABLE
FRAME TYPE AUTO , 802.2, 802.3, ETHER-II, SNAP
DHCP/BOOTP ENABLE , DISABLE
RARP ENABLE, DISABLE
IP ADDRESS xxx.xxx.xxx.xxx
SUBNET MASK xxx.xxx.xxx.xxx
GATEWAY ADDRESS xxx.xxx.xxx.xxx
INITIALIZE ON, OFF
PRINT SETTINGS ON, OFF
TCP/IP
Enables/Disables TCP/IP.
NETWARE
Enables/Disables NETWARE ® .
ETHERTALK
Enables/Disables EtherTalk ® .
NETBEUI
Enables/Disables NETBEUI.
FRAME TYPE
Sets the frame type.
DHCP/BOOTP
Specifies whether or not DHCP/BOOTP automatically resets.
125