Oki sdm: postscript forms, Creating & downloading a postscript project, Create the forms – Oki C 9400 User Manual
Page 269: Create a new project, Create the forms create a new project
5. Click
OK.
6. Click
Close.
OKI SDM: PostScript Forms
Note: PostScript forms are the ones to use if you are not experienced with PCL Macro
commands.
Creating & Downloading a PostScript Project
Important!
Remember that file names and paths are case sensitive.
Create the Forms
1. Create the document in your software application.
2. Click
File
→ Print and make sure the OKI C9200 or C9400 PostScript driver is selected.
3. Engage the Encapsulated PostScript (EPS) output option: Windows Me/98/95: - Click
Properties (or your application's equivalent). - Click the PostScript tab, then, if it is not
already selected, click Encapsulated PostScript (EPS). Windows NT 4.0: - Click
Properties (or your application's equivalent). - Scroll down to PostScript Options and
click it, then click PostScript Output Option and select Encapsulated PostScript (EPS).
4. Click
OK.
5. Print the document to a file using the extension .PRN.
Create a New Project
1. Open the OKI Storage Device Manager software.
268