Oki C 9400 - Manual (Page 214)

Custom Page Sizes: Windows NT 4.0 PostScript Driver
Creating the Default Custom Page Size: Windows NT 4.0 PS
Note: In the PostScript driver, you can set up one Custom Page Size in the driver to save for
future use.
To create a Custom Page Size in the Windows NT 4.0 PostScript driver:
1. Click Start
→ Settings → Printers.
The Printers dialog box appears.
2. Right click the OKI C9200 or C9400 PostScript printer icon, then click Document
Defaults.
The OKI Default dialog box appears.
3. Click Paper Size, and select PostScript Custom Page Size from the Change 'Paper Size'
Setting drop-down list.
4. Click Edit of Custom Paper.
The PostScript Custom Page Size Definition dialog box appears:
5. Select a Paper Feed Direction:
Notes
Maximum width for Long Edge First is 12.9 inches.
Paper length must be greater than the paper width.
• Long Edge First = media feeds in long edge first
• Short Edge First = media feeds in short edge first
• Long Edge First (flipped) = Reserved for future use.
• Short Edge First (flipped) = Reserved for future use.
6. Select a Unit of measure, then enter the Width and Height you wish to use.
7. Click OK.
8. Click OK and close the Printers dialog box.
213