Oki C 9400 - Manual (Page 132)

COPIES
Sets the default number of copies to be printed.
DUPLEX
Change to ON if you will always be using two-sided (duplex) printing for multi-page print jobs.
BINDING
Sets the default binding edge for duplex printing.
Example
For an 8½ x 11-inch document:
Long Edge = document bound on the 11-inch edge
Short Edge = document bound on the 8½-inch edge.
Note: Duplex settings you make in the printer drivers will override this menu setting.
JOB OFFSET
Applies to the top (face-down) exit only. This causes each consecutive document to be offset
left-right by approximately ¾-inch to make it easier to separate multiple copies of a document.
All media sizes except Tabloid Extra and A3 Nobi will be offset.
Change to OFF if you do not want documents to be offset.
PAPER FEED
Selects the default feed source for print media.
Note: Paper feed settings you make in the printer drivers will override this menu setting.
131