Oki C 9400 - Manual (Page 219)

4. Scroll down to Layout and click 2-Sided Printing, then select either Long Side ( ) or
Short Side ( ) binding under Change '2-Sided Printing' Setting.
Note: If 2-Sided Printing is grayed out, you need to activate the duplex unit in the
driver.
5. Click OK and close the Printers dialog box.
Fit to Page: Windows NT 4.0, PCL Only
This feature allows you to print a document on a different size media by reducing or enlarging it
to fit on the page. For example, you can proof a custom-size document on standard size paper,
reserving the special custom-size paper for use only for the final printing.
Using Fit to Page:
Note: If the document size is significantly larger than the print media, portions of the edge of
the document will be cut off to fit it on the page.
1. With the document you wish to print open in your software application, click File
→ Print.
The Print dialog box appears.
2. Make sure the OKI C9200 or C9400 PCL driver is selected, then click Properties (or your
application's equivalent).
3. On the Paper tab: if necessary, select the Source, then click the checkbox beside Fit to
Page.
A drop-down list appears below Fit to Page.
4. Under Size, click the paper size representing the document you wish to print, then select the
size conversion you wish to use from the drop-down list.
Example
To print a tabloid size document on letter-size paper:
5. Click OK then print the document.
218