Oki C 9400 - Manual (Page 296)

DISK IS WRITE PROTECTED
An attempt was made to overwrite a read-only file.
DISK FILE OPERATION FAILED
Error with hard disk operations. Try printing the job again.
DISK FILE SYSTEM IS FULL
Hard disk/flash memory is full. Check with your System Administrator or go into the printer menu
and clear out some of the Proof & Print or Secure Print jobs stored on the disk.
ttt EMPTY
Appears on the second line of the display to indicate that tray ttt is empty. Refill the tray with
print media.
ERROR POSTSCRIPT
A PostScript error has occurred. The rest of the data is ignored. When the job has completed, it
aborts and the message automatically clears.
Try printing the job again. This message can occur if virtual memory is used up. Reduce the
size of the print job (instead of printing the whole file at once, print several pages at a time;
reduce the number of graphics; print the document at a lower resolution; etc.). If you run into
this problem often, consider installing additional memory in the printer.
INSTALL ADDITIONAL
MEMORY
nnn:MEMORY OVERFLOW
The print job exceeded the printer's memory. Press ON LINE to clear the message and
continue.
Reduce the size of the print job (instead of printing the whole file at once, print several pages at
a time; reduce the number of graphics; print the document at a lower resolution; etc.). If you run
into this problem often, consider installing additional memory in the printer.
295