Installing the duplex unit, Back – Oki C 9400 User Manual
Page 399
Advertising
Right
(MP Tray)
Left
(Straight-Through
Paper Path)
Front
Step 1: Install the Duplex Unit
1. Unpack the duplex unit and remove any shipping materials.
2. Turn the printer off and unplug the power cable.
3. Pull out Tray 1, then remove it from the printer.
4. Remove the front cover section: grasp it at both ends, then lift and pull it off.
Note: Be sure to store the front cover section. If the duplex unit is ever removed, the
front cover section must be reinstalled.
5. Place the duplex unit on top of Tray 1, carefully aligning it with the tray.
398
Advertising