Oki C 9400 - Manual (Page 245)

5. To delete the job, press SELECT. Otherwise, press CANCEL.
The printer goes back on line.
Secure (Confidential) Documents:
Windows NT 4.0
Confidential Documents: Windows NT 4.0 PCL Driver
To send a confidential document to the printer using the Windows NT 4.0 PCL driver:
1. Open the document in the application.
2. Click File
→ Print.
The Print dialog box appears.
3. Make sure the OKI C9200 or C9400 PCL printer is selected, then click Properties (or
your application's equivalent).
The OKI Properties dialog box appears.
4. On the Paper tab, under Copies:
a. Select the number of copies you wish to print.
b. If applicable, click Printer Collate.
Note: If Job Type is grayed out, click Device options and click Printer hard disk, then
click OK.
c. Select Secure print as the Job Type.
The Job PIN dialog box appears.
5. Under Job Name Setting, enter a job name having up to 16 characters.
6. Enter the four-digit password (PIN) assigned to you by your network administrator, or
create one using any combination of numeric characters 0 through 7 (8 and 9 cannot be
used).
7. Click OK twice and print the document.
The document processes and downloads to the printer.
244