Oki C 9400 - Manual (Page 242)

1. Press MENU.
PRINT JOBS MENU
appears on the display.
2. Press SELECT and enter your personal ID (PIN) number using the control panel
buttons.
SELECT JOB ALL JOB
appears on the display.
3. Press VALUE + repeatedly until the name of the job you wish to delete appears.
4. Press CANCEL.
DELETE THE JOB
YES=SELECT/NO=CANCEL
appears on the display.
5. To delete the job, press SELECT. Otherwise, press CANCEL.
The printer goes back on line.
Secure (Confidential) Documents:
Windows 98 & 95
Confidential Documents: Windows 98 & 95 PCL Driver
To send a confidential document to the printer using the Windows 98 & 95 PCL driver:
1. Open the document in the application.
2. Click File
→ Print.
The Print dialog box appears.
3. Make sure the OKI C9200 or C9400 PCL printer is selected, then click Properties (or
your application's equivalent).
The OKI Properties dialog box appears.
4. On the Paper tab, under Copies:
a. Select the number of copies you wish to print.
Note: If Job Type is grayed out, click Device options and click Printer hard disk, then
click OK.
b. Select Secure print as the Job type.
The Job PIN dialog box appears.
241