Rarp, Ip address, Subnet mask – Oki C 9400 User Manual
Page 127: Gateway address, Initialize, Print settings, Parallel menu
RARP
Specifies whether or not RARP automatically resets.
IP ADDRESS
Sets IP address (see Changing the IP address).
SUBNET MASK
Sets subnet mask (see Changing the Subnet Mask).
GATEWAY ADDRESS
Sets gateway address (see Changing the Gateway Address).
INITIALIZE
Change the setting to ON if you wish the network to initialize whenever the menu is exited.
PRINT SETTINGS
Change the setting to ON if you wish to print a MenuMap including the results of a self-
diagnosis and a listing of the network settings. The MenuMap will print automatically when you
exit the menu mode.
Parallel Menu
Sets parameters for the parallel interface.
Defaults are
red bold
print.
Item (see descriptions below)
Values
PARALLEL
ENABLE
, DISABLE
BI-DIRECTION
ENABLE
, DISABLE
ECP
ENABLE
, DISABLE
ACK WIDTH
NARROW
, MEDIUM, WIDE
ACK/BUSY TIMING
ACK IN BUSY
, ACK WHILE BUSY
I-PRIME
3 MICRO SEC, 50 MICRO SEC,
DISABLE
126