Oki C 9400 - Manual (Page 384)

To install additional DIMMs:
Caution! Circuit boards can be damaged by static electricity and rough handling. Keep
board in packaging until you're ready to install it. DIMMs are sensitive to static
electricity. To avoid damage, ground yourself before handling DIMMs.
Step 1: Prepare The Printer
Back
Right
(MP Tray)
Left
(Straight-Through
Paper Path)
Front
1. Turn the printer off and unplug the power cord.
2. Detach the interface cable from the left side of the printer.
3. Remove and save the thumbscrew at the top and bottom which hold the control board in
place.
383