Oki C 9400 - Manual (Page 440)

Network Cable Requirements
Windows Systems
Requires Ethernet
®
cable with two twisted wire pairs and an RJ45 plug at the printer end.
Macintosh Systems
Requires Ethernet cable with RJ45 connectors at either end. If the printer is directly connected
to a network port, a crossover cable is required.
Connecting the Network Server
Note: You must supply your own Ethernet ® cable for connection to the printer.
1. Turn the printer off.
2. Connect your Ethernet cable to the network port on the print server.
3. Connect the other end of the cable to the network port.
4. Turn the printer on.
439