Oki C 9400 - Manual (Page 271)

To store the forms in the Flash memory instead of on the hard disk drive:
1. Double-click the file name in the Project Window.
The Edit Component Name and ID dialog box appears.
2. Under Volume, type in %Flash0%, then click OK.
Save the Project and Download it to the Printer
1. Click File
→ Save Project.
2. Click File
→ Send Project Files to Printer.
"Command Issued" appears.
3. Click OK.
Test Printing a PostScript Form
1. With OKI Storage Device Manager open and the appropriate printer icon highlighted,
click Printers
→ Test Form.
The Test PostScript Form dialog box appears.
2. Enter the file name for the form you wish to print (you can get this from the File List
printout), then click OK.
"Command Issued" appears.
3. Click OK and wait for the form to print.
PCL Macros (Forms)
Important! Unless you are experienced with PCL Macro commands, it is best to stick
with PostScript Forms.
Creating & Downloading a PCL Project
Important! Remember that file names and paths are case sensitive.
1. Create the Forms
a. Create the document in your software application.
b. Click File
→ Print and make sure the OKI C9200 or C9400 PCL driver is selected.
c. Print the document to a file using the extension .PRN.
2. Create a New Project
a. Open the OKI Storage Device Manager software.
270