Oki C 9400 - Manual (Page 199)

Each page will be reduced to 25% of its original size.
Four pages will print on each sheet for one-sided printing; eight pages with two-sided
(duplex) printing engaged.
N-Up Printing: Windows 98/95 PCL Driver
To print a job using N-Up printing in the Windows 98 & 95 PCL driver:
1. Open the document in the software application.
2. Click File
→ Print.
The Print dialog box appears.
3. Make sure the OKI C9200 or C9400 PCL printer is selected, then click Properties (or
your application's equivalent).
The OKI Properties dialog box appears.
4. Click the Layout tab. Under Finishing Mode, click the number of pages to be printed per
sheet.
5. Click your choice from the Page Borders drop-down list
6. Click OK and print the document.
N-Up Printing: Windows 98/95 PostScript Driver
To print a job using N-Up printing in the Windows 98 & 95 PostScript driver:
1. Open the document in the software application.
2. Click File
→ Print.
The Print dialog box appears.
3. Make sure the OKI C9200 or C9400 PostScript printer is selected, then click Properties
(or Setup. or your application's equivalent).
The OKI Properties dialog box appears.
4. Click the Layout tab. Under Pages on Sheet, click the number of pages to be printed per
sheet.
5. Click OK and print the document.
198