Oki C 9400 - Manual (Page 429)

Install the printer near an easily accessed power outlet.
Avoid damaging the power cord. Do not put anything on it or place it where it will be walked
on. If the cord becomes damaged or frayed, replace it immediately.
If you are using an extension cord or power strip with the printer, make sure that the total of
the amperes required by all the equipment on the extension is less than the extension’s
rating. The total ratings of all equipment plugged into the outlet should not exceed 15
amperes.
Do not poke anything into the ventilation slots of the printer. You could get an electrical
shock or cause hazardous electrical arcing, which could cause a fire.
Aside from the routine maintenance described in the documentation, do not try to service
the printer yourself. Removing the cover may expose you to shocks or other hazards.
Do not make any adjustments other than those outlined in the documentation. You may
cause damage that will require extensive repair work. The provided documentation
explains how to get your printer serviced by qualified Oki Data technicians.
If anything happens that indicates that your printer is not working properly or has been
damaged, unplug it immediately and follow the procedures in the provided documentation for
having your printer serviced.
Here are some of the things to look for.
The power cord or plug is frayed or damaged.
Liquid has been spilled into the printer, or the printer has been exposed to water.
The printer has been dropped, or the cabinet is damaged.
The printer does not function normally when you are following the operating instructions.
Federal Communications Commission (FCC)
Statements
Federal Communications Commission Declarations of
Conformity for 120 Volt Models
1. Product Identification
Product Name: C9200, C9400 and Duplex Option
Model No.: N31060A, N31061A and N31090A
2. Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
3. Responsible Party
Oki Data Americas, Inc.
2000 Bishops Gate Boulevard
Mt. Laurel, NJ 08054-4620
1-800-654-3282 (1-800-OKI-DATA)
Federal Communications Commission Radio Frequency
428