Tally Genicom Tally Colour Laser T8006e - Manual (Page 110)

Tally T8006e Color Laser Printers User Guide
102
The printer does not print.
Print process has stopped
and/or has stopped
responding.
Intermittent printing.
Symbols are printed.
(Continued on next page.)
The printer is offline (the
ONLINE lamp is off).
Press the ONLINE button
(the ONLINE lamp will light
when the printer is online).
An incompatible printer driver
is being used.
Load the correct printer driver
(page 23).
The source print data has been
deleted from the network dur-
ing printing, and/or user soft-
ware has stopped responding.
Restore print data and/or
printing program, and repeat
printing.
If a file size is too large (mega-
bytes), the printer or the user’s
computer may go into a time-
out period or a sleep mode
before all data has been trans-
ferred and spooled.
Reduce the file size by break-
ing the file into smaller print
jobs. Postpone the timeout or
sleep mode of the user’s com-
puter (page 125).
The image and/or file is too
large (megabytes) for available
disk space.
Reduce the file size by break-
ing the file into smaller print
jobs, or provide more disk
space.
Power surge, poor interface
connection, network prob-
lems.
Connect the printer properly.
Make sure that the software,
network, and operating envi-
ronment is compatible for the
printer.
The port selection and the pri-
oritized port settings prevent
the printer from using the par-
allel port.
Correct the settings on the
printer control panel for the
port selection and the priori-
tized port (page 125).
The operating mode for the
parallel port does not match
the printer operating mode.
Select the correct operating.
mode for the parallel port
(page 132).
The printer may not be cor-
rectly or properly connected to
your network.
Print a network configuration
Page (page 122) and check it.
If a data size of a page is too
Large, the printer max not
duplex print even specified.
Reduce the data size of the
page.
Slow or No Printing Possible Cause Correction