Tally Genicom Tally Colour Laser T8006e - Manual (Page 15)

Chapter 2 Setting Up Your Printer
7
Temperature
Make sure the temperature in the printer location stays constant. Keep the
printer away from direct sunlight. For best printer operation, install the
printer in a location where the temperature levels stay within the following
ranges:
Humidity
Excessive changes in humidity can cause unwanted condensation inside
the printer. For best printer operation, install the printer in a location
where humidity levels stay within the following ranges:
Power Source
Each printer model requires different types of electrical power, as shown
below. If you need additional information about the power requirements,
contact your dealer or a Tally Service Technician.
Warning! Use properly grounded wall sockets. Do not use converter plugs.
Caution! Use surge protection between the power source and the printer.
Fahrenheit Celsius
Recommended range: 63.5º to 80.6º 17.5º to 27º
Permitted range: 50º to 90.5º 10º to 32.5º
Recommended range: 50% to 70%
Permitted range: 20% to 80%
Model T8006e Part Number: 043302
Voltage 120 VAC + 10%
Frequency 60 Hz + 2 Hz
Consumption Up to 1,350 W
Model T8006e Part Number: 043300
Voltage 220 VAC to 240 VAC
Frequency 50 - 60 Hz + 2 Hz
Consumption Up to 1,350 W