Tally Genicom Tally Colour Laser T8006e - Manual (Page 65)

Chapter 5 Changing Print Defaults
57
Setting Options
The Options tab allows you to further customize your print job. For
example, you can choose to make the printer feed a sheet of paper
between each print job, or display some information while a job is
printing. Also, Printing Options and Other Features allow you to set
character smoothing or special black characters, among other available
settings.
Item Description
Output Tab
Page
Select Output Tab Page to produce a tab page for
each print job. A tab page is a sheet of paper that
separates one print job from another.
Before Print Job Select this box to direct the printer to put a tab
page before your job prints.
After Print Job Select this box to put a tab page after your job
prints.
Before and
After Print Job
Select this box to put a tab page before and after
your print job.
Display User ID
when printing
Select Display User ID when printing, to adjust the
user information that displays during printing. To
change the user information, select this box and
then enter a custom message to be displayed.
Output Blank
Paper
Select Output Blank Paper to prevent the printer
from producing blank pages that are not created by
a page break.
Print Slowly Select Print Slowly to help reduce inconsistencies
in density.
Remove sleep
mode
Turning on the check box of "Remove sleep mode"
can make an instant warming-up at the start of
print job even if the printer is in the sleep mode.
EMF Spooling EMF Spooling enables Expanded Meta File spool-
ing. This setting accelerates print speed. If incor-
rect printing results, however, clear the EMF
Spooling check box.