Tally Genicom Tally Colour Laser T8006e - Manual (Page 151)

Appendix C Control Panel Menu Functions
143
Gateway Address
The example below shows how to set the gateway address to
192.168.31.1. To return to the previous step, press the key:
Tray1:A4
Ready
1. Check that “Ready” appears on the
display and the DATA light is off.
Tray1:A4
Not Ready
2. Press the ONLINE key to enter
the offline mode.
Tray1:A4
Utility Menu
3. Press the MENU key (over 2 sec-
onds) to enter the menu.
Tray1:A4
Network Menu
4. Using the and keys, select
the desired setting.
IP Addr
0. 0. 0. 0
5. Press the ENTER key to enter
Network Menu. The display shows
the current setting.
GateWay Addr
0. 0. 0. 0
6. Using the and keys, select
the desired setting.
GateWay Addr
(000)
7. Press the ENTER key to enter the
GateWay Addr submenu.
GateWay Addr
(192)
8. Using the and keys, change
the number in parentheses to 192.
GateWay Addr
192. (168)
9. Press the ENTER key. Then using
the and keys, change the
number in parentheses to 168.