Tally Genicom Tally Colour Laser T8006e - Manual (Page 41)

Chapter 3 Installing Printer Drivers and Utilities
33
Setting Up a Network Printer on Macintosh
Operating System Requirements
For optimum printer performance, use the Macintosh printer driver in the
following system and network environment:
• Mac OS 8.1 through Mac OS 9.x, Mac OS X classic environment
(English Version)
• AppleTalk connection
• Standard 10BASE-T/100BASE-TX Ethernet interface
Hardware Requirements
The Macintosh computer must meet the following minimum hardware
requirements.
Microprocessor
Power PC.
Memory
At least 32 MB. 64 MB or more of memory is recommended.
Disk Space
At least 16 MB. 100 MB or more of disk space is recommended.
Installing Macintosh Printer Drivers
1. Insert the CD into your CD-ROM drive.
2. Double-click the Tally T8006e CD-ROM.
3. Double click the folder of the language you want to use.
4. In the driver folder for your printer model, double-click Installer.
5. The Installer will present a license agreement. Click Agree to con-
tinue.
6. In the Easy install tab of the Installer, click the Install button.
7. When the computer prompts you, click Restart.
8. After the computer restarts, go to the Chooser.
9. Click the Tally T8006e printer icon. The Connected To: window will
display the name of your printer.
Note: If the Connected To: window does not show your printer, verify the
printer is connected to the network and the printer is configured properly. For
further help, see “Macintosh Chooser Problems” on page 104.
10. Close the Chooser.