Tally Genicom Tally Colour Laser T8006e - Manual (Page 141)

Appendix C Control Panel Menu Functions
133
Timing
Timing allows you to select the timing sequence of the Ack and Busy
signals for the parallel interface. The Timing settings include A-B, A-B-A,
and B-A.
The following example shows how to change the timing of the parallel
interface from A-B to A-B-A.
Tray1: Legal
ComMode = CMPA *
8. Press the ENTER key to enter the
setting into memory.
9. Press the ONLINE key to return to
the online mode.
Tray1: A4
Ready
1. Make sure that “Ready” appears on
the display and the DATA light is off.
Tray1: A4
Not Ready
2. Press the ONLINE key to enter the
offline mode.
Tray1: A4
Test Menu
3. Press the MENU key to enter the
menu.
Tray1: A4
Parallel Menu
4. Using the and keys, select Par-
allel Menu.
Tray1: A4
ComMode
5. Press the ENTER key to enter the
Parallel Menu.
Tray1: A4
Timing
6. Using the and keys, select Tim-
ing.
Tray1: A4
Timing = A-B*
7. Press the ENTER key to enter the
Timing submenu. The display shows
the current setting.