Tally Genicom Tally Colour Laser T8006e - Manual (Page 111)

Chapter 9 Troubleshooting
103
(continued)
The printer does not print.
Print process has stopped
and/or has stopped
responding.
Intermittent printing.
Symbols are printed.
The LAN Network interface
cable is disconnected or is
damaged.
Make sure the LAN Network
interface cable is not damaged
and properly connected.
The logical printer is adding or
replacing character strings.
Set the Network operating sys-
tem so it will not add text-code
data.
Example 1: Set the Network
operating system so it does not
print the banner page at the
end of the job.
Example 2: Disable the auto-
matic Form Feed or New page
settings for NetWare®.
The LAN Network interface
cable is disconnected, or it is
damaged.
Check and connect the LAN
Network interface cable.
Slow or No Printing Possible Cause Correction