Tally Genicom Tally Colour Laser T8006e - Manual (Page 132)

Tally T8006e Color Laser Printer User Guide
124
TestMode
TestMode allows you to select the page size and media types for printing
the TestPrint, ConfigPage, NetConfig and StatusPage. Test mode settings
include PLAIN (plain paper), TRANS (transparencies), THICK (thick or
label paper) and DUPLEX (plain paper).
The following example shows how to change the TestMode settings from
PLAIN to TRANS.
Note: If you specify TRANS, printing stops until the paper in Tray 1 is
replaced with transparencies.
Tray1: A4
Ready
1. Check that “Ready” appears on the
display and the DATA light is off.
Tray1: A4
Not Ready
2. Press ONLINE to go offline.
Tray1: A4
Test Menu
3. Press the MENU key.
Tray1: A4
TestPrint
4. Press the key to enter Test Menu.
Tray1: A4
TestMode
5. Using the and keys, select Test-
Mode.
Tray1: A4
TestMode = PLAIN *
6. Press the ENTER key to enter the
TestMode submenu. The display
shows the current setting.
Tray1: A4
TestMode = TRANS
7. Using the and keys, select the
desired setting.
Tray1: A4
TestMode = TRANS *
8. Press the ENTER key to enter the
setting into memory.
9. Press the ONLINE key to resume
normal operations.