Tally Genicom Tally Colour Laser T8006e - Manual (Page 159)

Appendix D Control Panel Messages
151
Set Tray #
Paper Tray 1, 2 is not securely attached to
the printer (#: 1, 2).
Sleep Mode The printer is operating in energy-saving
mode until a new print job is received.
SVC ### ERROR
A printer error has been detected. Turn
the printer off, wait five seconds and then
turn the printer back on. If this message
appears regularly, contact your dealer or
Tally Technical Services.
TEST ## Printer is running initial diagnostics
(##: Test Number).
TEST finished. Printer finished initial diagnostics.
TFTP download. TFTP download mode is started up.
Toner CG Error
The installed toner cartridge is not the
correct type.
Tray # Load size
Paper Tray 1 or 2 does not contain the
correct media size
(#: 1, 2/size: paper size).
Tray # Load media
Paper Tray 1 or 2 does not contain the
correct media type
(#: 1, 2/media: media type).
UNAME Print data for the indicated user is being
printed.
Warming up
The printer is warming up. Printing will
begin once it has finished warming up.