Tally Genicom Tally Colour Laser T8006e - Manual (Page 135)

Appendix C Control Panel Menu Functions
127
SleepTime
SleepTime allows you to set the amount of time the printer will wait
before it enters sleep mode (from 5 to 240 minutes). When in sleep mode,
the printer uses less power (the default SleepTime setting is 30 minutes).
The following example shows how to change the SleepTime setting from
30 minutes to 15 minutes.
Tray1: B5/EXE.
SleepMode = OFF
8. Using the and keys, select the
desired setting.
Tray1: B5/EXE.
SleepMode = OFF *
9. Press the ENTER key to enter the
setting into memory.
10. Press the ONLINE key to return to
online mode.
Tray1: B5/EXE.
Ready
1. Check that “Ready” appears on the
display and the DATA light is off.
Tray1: B5/EXE.
Not Ready
2. Press the ONLINE key to go
offline.
Tray1: B5/EXE.
Test Menu
3. Press the MENU key to enter the
menu.
Tray1: B5/EXE.
ConfigMenu
4. Using the and keys, select Con-
figMenu.
Tray1: B5/EXE.
Timeout
5. Press the ENTER key to enter Con-
figMenu.
Tray1: B5/EXE.
SleepTime
6. Using the and keys, select
SleepTime.