Tally Genicom Tally Colour Laser T8006e - Manual (Page 88)

Tally T8006e Color Laser Printers User Guide
80
Cleaning the Inside of the Printer
Use a toner vacuum and a soft cotton cloth to clean the inside of the
printer following the procedure below.
Caution! Before cleaning the inside of the printer, put a sheet of paper
around the transfer drum so the toner vacuum does not touch the drum. Use
only a dry cotton cloth to wipe the inside of the printer. Do not expose the
OPC belt cartridge to light, and do not touch the surface of the OPC belt.
8. Slide the glass cover out of the optical
unit.
9. Using a dry cotton cloth, clean the
surface of the glass.
10. Slide the glass cover into the optical
unit.
11. Reinstall the OPC belt cartridge and
toner cartridges.
12. Close top and front covers and plug
in the printer power cord.
1. Open the top and front covers.
2. Remove the toner cartridges.
3. Remove the OPC belt cartridge.
4. Put the OPC belt cartridge on a sheet
of clean paper with the photosensi-
tive belt facing upward.
5. Put several sheets of clean paper over
the OPC belt cartridge to protect the
photosensitive belt from light.