Tally Genicom Tally Colour Laser T8006e - Manual (Page 33)

Chapter 3 Installing Printer Drivers and Utilities
25
Assigning the Printer an IP Address, Subnet Mask
and Gateway Address
To print using the TCP/IP protocol, you must assign the printer an IP
address, subnet mask and a gateway. If you are uncertain about what
setting you should use, consult your network administrator.
The IP address, Subnet Mask, and Gateway can be assigned through the
printer's control panel or by using the Discover Tool and the printer's
internal web page. The Discover Tool is a utility that searches the
network for T8006e printers and displays the IP address and device name.
Clicking on the IP address will take you to the printer's internal web page
and allow the configuration of the network settings.
For more information on how to use the Discover Tool and to how to
configure the printer using the internal web page, refer to Appendix E
Network Management.
IP Address
The IP Address submenu allows you to set the printer IP address from
the printer control panel. The following example shows how to set the
printer IP address to 192.168.31.27.
Note: Press the key to go back to the previous step.
Tray1 : A4
Ready 1. Check that “Ready” appears on the display
and the DATA light is off.
Tray1 : A4
Not Ready 2. Press the ONLINE key to go “Not
Ready”.
Tray1 : A4
Test Menu 3. Press and hold the MENU key to start the
Extend Menu.
Tray1 : A4
Utility Menu 4. If “Utility Menu” appears on display,
release the MENU key.
Tray1 : A4
Network Menu 5. Press the and keys to go to the Net-
work Menu.
IP Addr
169.254.193.249 6. Press the ENTER key to select the IP
address submenu.