Tally Genicom Tally Colour Laser T8006e - Manual (Page 149)

Appendix C Control Panel Menu Functions
141
Subnet Address
The example below shows how to set the subnet address to
255.255.255.0. To return to the previous step, press the key.
IP Addr
192. 168. (031)
9. Press the ENTER key. Then using
the and keys, change the
number in parentheses to 031.
IP Addr
192.168. 31. (027)
10. Press the ENTER key. Then using
the and keys, change the
number in parentheses to 027.
IP Addr
192. 168. 31. 27*
11. Press the ENTER key to enter the
setting into memory.
Tray1: A4
Reset
12. Press the ONLINE key to return
to online mode.
Tray1:A4
Ready
1. Check that “Ready” appears on the
display and the DATA light is off.
Tray1:A4
Not Ready
2. Press the ONLINE key to enter
the offline mode.
Tray1:A4
Utility Menu
3. Press the MENU key (over 2 sec-
onds) to enter the menu.
Tray1:A4
Network Menu
4. Using the and keys, select
the desired setting.
IP Addr
0. 0. 0. 0
5. Press the ENTER key to enter
Network Menu. The display shows
the current setting.
SubNet Mask
0. 0. 0. 0
6. Using the and keys, select
the desired setting.