Tally Genicom Tally Colour Laser T8006e - Manual (Page 23)

Chapter 2 Setting Up Your Printer
15
Installing the Optical Photoconductor (OPC) Belt
Cartridge
Caution! Do not touch or wipe off any powder that is on the OPC belt, or
expose the OPC belt to light.
1. Open the top and front covers.
2. Lift the green OPC belt cartridge
lock levers up until they unlock,
with the channels upright.
3. With the top cover open, remove
the protective sheet from the
OPC belt cartridge.
4. Remove the two shipping pins
from the OPC belt cartridge.
5. Hold the OPC belt by the handle
at the top. Ensure that the white
gear is on the right hand side as
viewed from the front of the
printer. Slide the OPC belt car-
tridge downward along the green
lock-lever guides and into the
printer carefully.