Tally Genicom Tally Colour Laser T8006e - Manual (Page 75)

Chapter 6 Maintaining Your Printer
67
2. Pull and unlock the lever.
3. Open the top cover fully.
4. Turn the two green lock levers to
unlock the used fuser cleaning roller.
5. Lift the fuser cleaning roller out of the
printer.
6. Discard the used fuser cleaning roller as
indicated in “Disposing of Supplies” on
page 71.
7. Insert the new fuser cleaning roller.
8. Turn the two green lock levers to lock
the new fuser cleaning roller in place.
9. Close the top cover carefully until it
locks.
Note: Set the fuser cleaning roller counter to zero after initial installation
and replacement. For more information, see “Setting the Fuser Cleaning Roller
Counter to Zero” on page 14..