Trimble Outdoors 5700/5800 - Manual (Page 114)

12 Overview
1 02 5700/5800 GPS Receiver User Guide
5800 GPS Receiver Oper
ation
This chapter introduces the Trimble® 5800 GPS receiver, which is
designed for GPS surveying applications. The 5800 receiver
incorporates a GPS antenna, receiver, internal radio, and battery in a
rugged light-weight unit that is ideally suited as an all-on-the-pole RTK
rover. Three LEDs allow you to monitor the satellite tracking, radio
reception, data logging status, and power. Bluetooth®
wireless
technology provides cable-free communications between receiver and
controller. The 5800 receiver provides 24 total channels of L1/L2
satellite tracking, and supports logging of raw GPS observables to the
handheld controller for post-processed applications.
The 5800 receiver is available as a standalone rover or as part of the
GPS Total Station® 5800 system, offering maximum versatility in the
system configuration to meet your specific requirements.
12.1
Features
The receiver provides the following features:
• Centimeter -accuracy, real-time positioning with RTK/OTF data,
up to 10 Hz position updates
• Submeter-accuracy, real-time positioning using pseudorange
corrections
• Adaptive dual-frequency RTK engine
• WAAS/EGNOS capability
• Automatic OTF (on-the-fly) initialization while moving
• Single Lithium-ion rechargeable battery
• Cable-free Bluetooth communications with the Trimble
Attachable Control Unit (ACU), or TSCe™ controller with
Blue
Cap® module (“the controller“)
• Two RS-232 serial ports for:
– NMEA output
– RTCM SC-104 input and output