Message scheduling – Trimble Outdoors 5700/5800 User Manual
Page 189
5700/5800 GPS Receiver User Guide 1 77
RTCM Output B
5700/5800 GPS Receiver Oper
ation
B.2
Message Scheduling
Table B.2 describes the frequency at which messages are generated
when they are enabled in a base receiver.
Table B.2
Message scheduling
Type
Frequency
1
Every second
3
The 10th second after the first measurement, then every 10 seconds after that
9-3
Every second
18
Every second
19
Every second
22
The 5th second after the first measurement, then every 10 seconds after that
23
The 4th second after the first measurement, then every 10 seconds after that
24
The 4th second after the first measurement, then every 10 seconds after that
59-sub, 13
The 5th second after the first measurement, then every 10 seconds after that
1004
Every second
1006
Every 10 seconds
1008
Every 10 seconds
1013
Every 300 seconds