Trimble Outdoors 5700/5800 - Manual (Page 31)

5700/5800 GPS Receiver User Guide 19
Setting up the Receiver 3
5700 GPS Receiver Oper
ation
Figure 3.6 Postprocessed setup
Note – Instead of hanging the receiver on the tripod, you can place the
receiver in its base case. Run the antenna cable out of the portal in the side
of the base case to the antenna so that the case can stay closed while the
receiver is running.
3.1
Pole-Mounted Setup
To mount the 5700 receiver on a pole, you need to do the following:
1. Mount the eRTK™ Range Pole antenna (RPA).
2. Mount the 5700 receiver.
2 3
t