Trimble Outdoors 5700/5800 - Manual (Page 137)

5700/5800 GPS Receiver User Guide 1 25
Configuration 1 5
5800 GPS Receiver Oper
ation
For more information on applying application files, see Chapter 16,
Software Utilities.
15.3
Application Files
An application file is organized into records. Each record stores
configuration information for a particular area of receiver operation.
Application files can include the following records:
• File Storage
• General Controls
• Serial Port Baud/Format
• Reference Position
• Logging Rate
• SV Enable/Disable
• Output Message
• Antenna
• Device Control
• Static/Kinematic
• Input Message
An application file does not have to contain all of these records. When
you apply an application file, any option that is not included in the
records in the file remains at its current setting. For example, if you
apply an application file that only specifies the elevation mask to use,
all other settings remain as they were before the application file was
applied.
You can store up to twenty different application files in the receiver. You
can apply an application file’s settings at the time it is transferred to the
receiver, or at any time afterwards.