Trimble Outdoors 5700/5800 - Manual (Page 95)

5700/5800 GPS Receiver User Guide 83
Default Settings 9
5700 GPS Receiver Oper
ation
If there is a timed application file on the receiver, the receiver
automatically applies the file’s settings and begins logging (if logging
settings are included in the file) at the specified time. If the receiver is in
Sleep mode, it wakes up five minutes before the start time of the timed
application file, and then begins logging, if required, at the specified
start time.
When you send an application file
to the receiver and … then the receiver settings are changed …
you apply the file’s settings immediately as soon as you send the file to the receiver
you apply the file later as soon as you apply the file
it is a timed application file at the specified activation time