Trimble Outdoors 5700/5800 - Manual (Page 43)

5700/5800 GPS Receiver User Guide 31
Setting up the Receiver 3
5700 GPS Receiver Oper
ation
• Serial (cellphone to DB9) cable (supplied with the cellular
modem or phone)
• Trimble DB9 to 0-shell Lemo cable
Note – This cable is suitable only if flow control can be disabled
on the cellular modem. If the cellular modem does not support
this functionality, a special cable is required. For more
information, refer to the document Using Cellular and CDPD
Modems for RTK, which is available from your local Trimble
Distributor.
Figure 3.13 shows the components required to connect a cellphone to a
5700 receiver.
Figure 3.13 Connecting a cellphone
For more information on using a cellular modem as a data link, refer to
the Trimble Survey Controller User Guide.
PUSH PUSH
c R
2 3
t
Serial cable
DB9 to Lemo cable