Sources of electrical interference, General guidelines, 5800 gps receiver oper ation – Trimble Outdoors 5700/5800 User Manual

Page 121

Advertising
background image

5700/5800 GPS Receiver User Guide 1 09

Setting up the Receiver 1 3

5800 GPS Receiver Oper

ation

Water

Heat greater than 65 °C (149 °F)

Cold less than –40 °C (–40 °F)

Corrosive fluids and gases

132.2

Sources of electrical interference

Avoid the following sources of electrical and magnetic noise:

Gasoline engines (spark plugs)

Televisions and computer monitors

Alternators and generators

Electric motors

Equipment with DC-to-AC converters

Fluorescent lights

Switching power supplies

132.3

General guidelines

C

WARNING –

5700 and 5800 GPS receivers use a rechargeable Lithium-ion

battery. To avoid personal injury or equipment damage, make sure that
you read and understand the Safety Information chapter at the front of
this manual.

The following guidelines apply whenever you set up your receiver for
operation:

When plugging in a Lemo cable, make sure that the red dots on
the receiver port and the cable connector line up.

Do not use

force to plug cables in, as this may damage the connector pins.

Advertising