Trimble Outdoors 5700/5800 - Manual (Page 154)

17 Specifications
1 42 5700/5800 GPS Receiver User Guide
5800 GPS Receiver Oper
ation
17.3
Technical Specifications
Table 17.3 lists technical specifications for the 5800 receiver.
Table 17.3 Technical specifications
Feature Specification
Tracking 24 channels L1 C/A code, L1/L2 full cycle carrier
Fully operational during P-code encryption
WAAS satellite tracking
Signal processing Maxwell architecture
Very low-noise C/A code processing
Multipath suppression
Start-up Cold start: < 60 seconds from power on
Warm start: < 30 seconds with recent ephemeris
Initialization Automatic while moving or static
Minimum
initialization time 10 sec + 0.5 × baseline length (km)
Communications Two RS-232 serial ports (Port 1, Port 2,)
Port 1: Baud Rates up to 115,200 bps
Port 2: Baud Rates up to 115,200 bps
RTS/CTS flow control negotiation supported on Port 2
only
Bluetooth communications with Trimble ACU or TSCe
controller with Blue
Cap module
Configuration Via user-definable application files or GPS
Configurator
Output formats NMEA-0183: AVR; GGA; GSA; GST; GSV; PTNL,GGK;
PTNL,GGK_SYNC; HDT; PTNL,PJK; PTNL,PJT; ROT;
PTNL,VGK; VHD; VTG; ZDA
GSOF (Trimble Binary Streamed Output)
RT17