Battery 1 led and battery 2 led, Starting and stopping the receiver, Logging data – Trimble Outdoors 5700/5800 User Manual
Page 51: Starting and stopping the receiver logging data, 5700 gps receiver oper ation
5700/5800 GPS Receiver User Guide 39
General Operation 4
5700 GPS Receiver Oper
ation
42.4
Battery 1 LED and Battery 2 LED
The Battery LEDs inside the two Battery icons
indicate the status
of the two internal batteries, or the power sources connected on Ports 2
and 3.
By default, each battery LED indicates the status of the external power
source on the corresponding port. If no external source is detected,
each LED indicates the status of an internal battery. The color of the
LED indicates whether the power source is currently in use (green) or is
on standby (yellow).
4.3
Starting and Stopping the Receiver
To turn on the receiver, press
[P]
.
To turn off the receiver, hold down
[P]
for two seconds.
4.4
Logging Data
You can log data to the CompactFlash card in the 5700 receiver, or
alternatively to the survey device.
Color
Meaning
Behavior
Meaning
Green
Power source is
in use
On
Healthy
Fast flash
Low power
Off
No power source is present
Yellow
Power source is
on standby
On
Healthy
Fast flash
Low power
Flash
Dead
Off
No power source is present