Uniden UBCD996T - Manual (Page 106)

106
This setting determines whether the scanner automatically ignores transmissions
found during Custom Search, Quick Search, or Close Call operation that are on
common broadcasts, paging systems, and other annoyance radio sources.
Broadcast screening does not work in All service search ranges.
— turns on broadcast screen on each band.
— turns off broadcast screen on each band.
— lets you set broadcast screen only on bands you
select. or appears next to each option. Turn the to select an
option then press to change the setting.
the scanner skips known paging system frequencies.
— the scanner skips known FM frequencies.
— the scanner skips known UHF TV frequencies.
— the scanner skips known VHF TV frequencies.
— select the custom band where you want to screen out broadcast
sources.
— brings you to a menu setting to let you program a custom
frequency range for broadcast screen. Turn the to select an option
then press to change the following setting.
To set the custom range of a band, select one and press to set the limit.
— select the group where you want to screen out broadcast sources.
enter the lower limit of the frequency range, then press to
set it.
— enter the upper limit of the frequency range, then press
to set it.
To set the custom range of a band, select one and press to set the limit.
Note:
specific
Scroll Control
—
Scroll Control
—
[MENU]
Set All Band On
Set All Band Off
Set Each Band
On Off
Pager
FM
UHF TV
VHF TV
Band 1-10
Program Band
Band 1-10
Set Lower Limit
Set Upper Limit
Srch/CloCall Opt
Q
g
Q g
Finding Repeater Output Frequencies