Uniden UBCD996T - Manual (Page 15)

Distance to a POI, Direction to a POI, Time to a POI, Speed, Position, and more.
— Lets you quickly select and search the scanner’s
preprogrammed frequencies.
— Lets you program up to 10 custom search ranges. You can
search any of these ranges simultaneously.
— Lets the scanner search for CTCSS or DCS tones or codes
on any channel or during a search. The scanner can identify up to 50 CTCSS tones
and 104 DCS codes.
— Lets you search from the currently-tuned frequency if you are
searching a conventional system.
— Automatically stores all active frequencies into the
selected conventional system.
— Automatically stores all new talk group ID’s into a
channel group you select.
— Priority channels let you keep track of activity on your most
important conventional channel(s) while monitoring transmissions on other channels.
— You can set the scanner so it scans only the priority channels.
— You can transfer programming data to and from your scanner and
your personal computer, and control the scanner using a computer. This helps you
find frequencies listed on the Internet and load them into the scanner. Free PC
control and programming software will be available at the UBCD996T web page at
www.uniden.com.au (for Australia) or www.uniden.co.nz (for New Zealand).
— You can clone all programmed data, including the contents of the
scanner’s memory, menu settings, and other parameters from one UBCD996T
scanner to another UBCD996T scanner.
Search
Auto Store
Priority
PC Control and Cloning
Service Search
Custom Search
CTCSS/DCS Search
Quick Search
Frequency AutoStore
Talk Group ID AutoStore
Priority Scan
Priority Plus
PC Control
Clone Mode
15