Uniden UBCD996T - Manual (Page 93)

93
To lock out a frequency found while searching, press one time to temporarily
lock it out ( appears) or twice to permanently lock it out (
appears).
If all frequencies in the search range you selected are locked out,
appears and the scanner does not search the range.
If the service range you select uses channels (such as CB Radio or Marine), the
scanner displays the service channel number.
Quick Search lets you search from the currently-tuned frequency if you are scanning
a conventional system or sets the system to ID search if you are scanning a trunked
system.
If you are on a conventional system or channel, press to
start quick search. appears. Press
to go to quick search hold.
Press to start quick search or to go to the search menu.
Custom Search lets you program and search 10 custom search ranges. You can
search any of these ranges simultaneously and select each custom search range
you set. During custom search, the scanner searches starting with the lowest
frequency in the search range you select to the highest frequency in the range.
There are two methods to begin a custom search.
Search ranges are preset. These ranges can be edited. See “ Editing a Custom
Search Range” on Page94 on Page to change the range.
You cannot turn off all custom search ranges.
The other approach is:
+
Press to .
[L/O]
Notes:
+ [SCAN/SEARCH]
[HOLD/RESUME]
[E ] [.No]
Notes:
[MENU]
[SCAN/SEARCH]
Temporary Locked
Out
All Locked!
Quick Search? Yes = ”E” / No = ”.”
Search for ...
Custom Search ...
Quick Search? Yes=”E” / No=”.”
[.No] then Custom Search
L/O
!
!
!
!
Quick Search
Custom Search
YES
g Q g
Q g
Q g
g