Programming sites mesl – Uniden UBCD996T User Manual
Page 76
76
Copying Systems
MECSL
Deleting Systems
MECSL
Setting the Site Name
ME
Occasionally you might want to copy and rename a system to highlight one group
over another.
One system might be called City - Fire and the same system City - PD with
adjustments to data within.
This lets you quickly locate the desired set of data.
To copy a system including all settings, groups, and channels:
Select the existing system
Enter your new name using the
and
and
to traverse the
display and enter characters. Press
when finished.
Select the existing system
Deleted systems cannot be restored. You must re-enter them.
This section covers settings that apply to trunked radio site. You must program at
least one site for each trunked radio system. When you program multiple sites, all
sites share the same channel groups and channels within the system.
You can only program one site in an EDACS SCAT and LTR system.
Each site name can be up to 16 characters. Abbreviate as necessary to fit. The site
name alternates with the Channel group when the scanner stops on a channel.
The default site names include the following letter in the 16th position to indicate the
system type:
[MENU]
Program System
Copy System
New Sys Name?
Program System
Delete System
Yes=”E” / No= ”.”
Scroll Control
[4]
[6]
[MENU]
Important:
Note:
Programming Sites
MESL
Confirm Delete?