Uniden UBCD996T - Manual (Page 78)

78
Notes:
[.No]
[MENU]
Notes:
[MENU]
[.No]
[MENU]
!
!
!
!
!
!
Access single-digit system/site Quick Keys by pressing the single digit on the
keypad during scanning. Access two-digit system Quick Keys by pressing
then both digits.
You can assign as many systems to the same quick key as you want.
To be scanned, a system’s Quick Key must be activated and the system must be
unlocked.
Select a trunked system
Select a Site
Select a startup key from 0-9 or select “.” for no startup key.
To unlock the system at startup, press and hold the selected startup key while
you turn on the scanner.
The system Quick Key is also enabled.
If you press a different key at startup, the system is locked out.
If you do not assign the system a startup key, the system is not affected by any
key press during startup.
Select a trunked system
Select the site
(or select an existing frequency) Input a site frequency
using the number keys and key, then press . If you are entering
frequencies for an LTR or EDACS system, the scanner will also prompt you to enter
the LCN for the frequency you just entered. LCN’s (logical channel numbers) are
provided from the same source where you got the other system information.
To enter additional frequencies, press , then to select
Then repeat the above.
Setting the Site Startup Key MESL
Setting Site Frequencies MESL
Program System
Edit Site
Set Startup Key
Program System
Edit Site
Set Frequencies
New Frequency
New Frequency.