Uniden UBCD996T - Manual (Page 121)

121
Q g
Q g
Q g
g g
g
g
g
g
Q g
g
Q
Q
Q
Q
Set Type
Set LocationInfo
Set Lockout
Lockout
Temporary L/O
Program Location
Dangerous Xing
Delete Location
Confirm Delete? Yes=”E” / No=”.”
Set Alert Beep Off
Alert 1 Alert 4
Set Alert Volume
At this level you have an opportunity to reassign or edit the
location type you first selected and set the location to either one of the other types or
change the data in an existing location.
This option also lets you associate a new Alert Tone to POI. Dangerous Xing and
Dangerous Road each have unique Alert Tones that cannot be changed. You can
still set a different volume level with the new Alert Tone for all three types.
Input the latitude and then the longitude.
As you near your target location, an alert sounds at ,
, and mi. If you hear the first and prefer to not hear any others that occasion,
simply press to disable the operation while keeping all the data for another
time. You can use the menu option as well. When you set the location
system to and move away more than four miles and then come
back again, status is automatically canceled. If you turn off the switch, the
scanner is unlocked.
If you have programmed a location that you no longer want, you can delete it as
follows.
Select a location such as
Location to be deleted
Make your choice to either delete the location or to cancel your action.
Choose from , no tone sounds or one of the alert
melodies to .
Once you make a Tone selection you are then asked to assign a volume level to that
selection.
select from 15 sound levels, plus Auto. As you rotate
the the Alert tone you set is played louder and louder. Press to
select a volume level. You can also select Auto, a level that is the same setting as
your master volume control setting.
0.5
0.25 0.1
[L/O]
L/O
[MENU]
Scroll Control
Deleting a Location
For POI Only