Uniden UBCD996T - Manual (Page 45)

45
Operation
Turning On the Scanner and Setting the Squelch
Startup Key Operation
To turn the scanner on, rotate clockwise. Turn the knob to a comfortable
sound level.
Rotate the squelch control clockwise until you either hear a broadcast or noise
just stops. The control is now set for strong signals. If you desire to hear a weaker
signal, turn it counter clockwise from that point until you hear background noise once
more.
You can setup a Startup Key Configuration so that the scanner can change the
lockout for each system or each site by pressing an assigned key while you power
up the scanner or an opening screen is displayed. Navigate to Set Startup Key there
are differences in the menu structure for Trunked and Conventional systems.
Select the conventional system
for each system.
Select the trunked system
Select the site
for each system or site.
Select a Service Range
OR
[VOL]
[SQ]
[MENU]
[MENU]
[MENU]
Conventional
Trunked
Search Range
Program System
Edit Sys Option
Set Startup Key
Program System
Edit Site
Set Startup Key
Search for…
Edit Service
Search with Scan
Set Startup Key