Uniden UBCD996T - Manual (Page 47)

47
Selecting Systems to Scan
Selecting System Channel Groups
To select systems to scan, press then press the quick key assigned to the
system or systems you want to scan. For quick keys , press the quick key’s
number. For quick keys 10-99, press then press the quick key’s 2-digit number.
To stop scanning the system(s), press (if the quick key is a 2-digit quick key)
then the number button or buttons again.
The Sx: (system) indicators on the display show the systems that are currently
selected.
To select or lock out a system that is not assigned to a key, press then rotate
the Scroll Control until the desired system is selected. Then, press within 2
seconds to either lock out or unlock the system.
Within a system, you can assign groups of channels to a group quick key (see “
Setting the Group Quick Key” on Page84).
Follow these steps to activate or deactivate a channel group within a system while
scanning.
1. Press to hold on the system or tap then turn the
to select the system.
2. While still appears on the display, press the number key corresponding to the
channel group you want to activate or deactivate.
Scan
[0] - [9]
[.No]
[.No]
[L/O]
[HOLD/RESUME] Scroll
Control