Uniden UBCD996T - Manual (Page 166)

18
Confi guration — Menu Mode
Once you have the units on, press [MENU] to enter
the Confi guration Settings Options. You can skip the
opening screens by holding [MENU] while turning on
power. You see the Remote
Head Menu screen.
To select an item on the
screen, rotate the FUNC
knob to scroll to the item.
To make a choice, press [E/ Yes ] or the rotary FUNC
knob.
To step back to a previous menu, press [MENU].
•
•
•
To exit from the Menu Mode, press [SCAN],
[HOLD], or [L/O].
To re-enter the Menu Mode, turn the Remote head
off then on while holding in [MENU].
Setting the UBC-RH96 LCD Contrast
Rotate the rotary control to Set LCD Contrast Set LCD Contrast
then press the knob or [E/Yes].
Rotate the knob from
Contrast 1 Contrast 1 through
Contrast 1 5 Contrast 1 5 . The LCD contrast changes with
each level. The default is level 8.
When you reach the desired level, press the knob or
[E/ Yes ] again to make your selection.
•
•
1.
2.
3.
Remote Head Menu Remote Head Menu
Set LCD Contrast Set LCD Contrast
Mobile Option Mobile Option
Handy Option
Handy Option
UBC-RH96 Digital Scanner OM.indd18 18 UBC-RH96 Digital Scanner OM.indd18 18 10/9/07 4:16:02 PM 10/9/07 4:16:02 PM