Uniden UBCD996T User Manual
Page 48
48
Locking/Unlocking Systems
Locking/Unlocking Channels
ID Scan/ID Search Mode
Follow these steps to lock out a system so that it does not scan even if its quick key
is selected.
1. Tap the Scroll Control to switch to the Function Mode
then rotate the control
to select the desired system.
2. Press
to temporarily lock out the system.
appears. Or,
quickly press
twice to permanently lockout the system.
appears.
3. To unlock temporarily locked out systems, turn power off and then back on. To
unlock permanently locked out systems, repeat Steps 1 and 2.
appears.
If the scanner has stopped on a channel press
once to temporarily lock it out
or quickly press
twice to permanently lock it out. Cycling power off/on
automatically unlocks temporarily locked-out channels.
To lockout a channel when the scanner has not stopped on the channel, or to unlock
a permanently locked-out channel.
1. Press
to hold on a channel.
2. Tap the
to switch to the Function Mode
, then rotate the
control
to select the system where the channel is stored.
3. Tap the
or wait 2 seconds, then rotate the
to
select the channel you want to lock or unlock.
4. Press
to temporarily lock or unlock the current the channel. Double-tap L/O
to permanently lockout the current channel.
While you are scanning a trunked system, the scanner can be in either ID Scan or
ID Search mode:
ID Scan — the scanner only stops on talk group ID’s (TGID) that you have
programmed into the system that are unlocked.
[L/O]
[L/O]
[L/O]
[L/O]
[HOLD/RESUME]
Scroll Control
Scroll Control
Scroll Control
[L/O]
Temporary L/O
Locked Out
System
Unlocked
!