Zebra Technologies TTP 7030 - Manual (Page 107)

107 Specifications
Command Code Modes (Non-Windows Applications)
10/05/2009 TTP 7030™ Technical Manual P1003636-002
Command Code Modes (Non-Windows Applications)
Basic Character Set
The default fonts use Windows code page 1252 Western which contains ISO 8859-1 (ANSI)
characters. You can use other character sets by creating and loading appropriate font files.
Characters 0 to 31 are control codes that cannot be changed, but 32 to 255 can be custom
designed.
The table below shows the characters stored in flash PROM on the printer control board.
Orientation
Horizontal (Portrait Mode) and

Vertical (Landscape Mode)
Number of possible fonts: 8
Font memory Free memory depends on firmware version, see self-test
printout
Font technology Bitmap fonts, non scaleable
Standard fonts TTP Mono 9, Arial 9, Symbol 9, Wingdings 10, and Code 39
Text attributes Bold, underline, reverse print, multiple-width, multiple
height. Attributes can be combined on the same text line.
Logotypes 16 logotypes can be stored in flash memory
Logotype memory Free memory depends on firmware version, see self-test
printout